...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest - $6,500 (Crookston)

‹ image 1 of 14 ›
1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 1
1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 1 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 2 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 3 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 4 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 5 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 6 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 7 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 8 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 9 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 10 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 11 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 12 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 13 thumbnail1954 Monarch Series 60 Toolmakers Lathe 13x30 Taper Attachment Steady Rest 14 thumbnail
condition: good
make / manufacturer: Monarch
model name / number: Series 60
size / dimensions: 13x30

QR Code Link to This Post

1954 Monarch Series 60 Toolmakers 13x30” Lathe for sale. This machine has an actual swing of 15.5” and 30” between centers. Spindle speeds from 19-800rpm. D1-6 camlock spindle. It is equipped with the original steady rest, full taper attachment with bed clamp, Cushman 3 jaw chuck and leadscrew reverse.

All of the gearboxes have been drained, flushed and refilled with the appropriate oil. Power feeds and threading are all working. Has dual power feeds and reverse on the apron. It runs and shifts through all the gears smoothly. Headstock gears look like new.

Powered by a 7.5hp 3 phase motor- currently wired at 230v 3 phase. I can install a VFD on this machine if single phase input is needed. Machine footprint is 8x4’ and weight is about 4500lbs.

Can be inspected under power and I can load or arrange freight if needed.

post id: 7878735053

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.